Must read! Before using a “water heater” when staying at a hotel, follow these steps every time.
I believe that many people who stay in hotels or accommodations may have some thoughts that think of the news of a water heater malfunctioning, electrical leakage while taking a shower, and death without knowing it, and may be disgusted. Today, News has a method to check the readiness of the water heater for everyone. Follow these steps to be confident and worry-free before taking a shower in a different place.
Steps to check the safety of your water heater
Using a water heater in a hotel or room that we are not familiar with may cause us to forget to pay attention to safety. However, checking the safety of the water heater before use is something that should be done every time to prevent danger from electric shock or electric leakage, especially in cases where the water heater in the ufabet https://ufabet999.app room may not be inspected regularly as it should be.
Easy steps to check your water heater before taking a shower
- Press the Test button. Before starting to use the water heater, you should press the Test button of the machine every time. This button will check the safety of the electrical system in the water heater.
2. Check the signal light. If the ELCB light (green light) goes out after pressing the Test button, it means that the emergency power cut system is working. This means that the water heater is working normally and is safe from electrical leakage.
3. Press the Reset button. After that, press the Reset button to restart the water heater to work normally.
4. Shower with confidence When everything has been checked, you can use the water heater with peace of mind.
Cautions
If the Test button is pressed and the light does not go out, it means that the water heater may have a safety problem, such as the ELCB system not working or there is an electrical leak in the machine. In this case, you should immediately notify the staff to move rooms or ask a technician to inspect it immediately for the safety of the user.
Learn more about how the Test button works
Pressing the Test button is very important because it is a tool that helps confirm that the water heater has a working electrical leakage protection system. The operation of the system is as follows:
1. Popping When the Test button is pressed, the machine will simulate a situation where there is an electric leak. The popping of the system shows that if there really is an electric leak, the system will cut off the electricity and prevent danger immediately.
2. Popping indicates correct connection. The popping that occurs shows that the electric shock protection device is working at full capacity because the system will not pop if the wires are connected incorrectly.
3. Popping indicates that the device is not broken. If the system can pop, it means that the electric shock protection device is still working properly and is not broken.
summarize
Checking your water heater before use is a simple step that should not be overlooked, especially in unfamiliar rooms. Pressing the Test button will confirm that the water heater is safe from electrical leakage and is working properly. So, don’t forget to do it every time before taking a shower for maximum safety.
I hope this information will be useful and help everyone to shower with confidence.